ACO Multiline
ACO Euroline
- Euroline 100
- Euroline 200
- Euroline (Slab Drain) | 40, 50 & 60
Product description
The ACO Euroline system is engineered to endure the weight of automobiles, making it ideal for gardens and residential use. By effectively diverting rain and wastewater away from entrances, walkways, garage forecourts, and terraces, it helps preserve the integrity of the building’s structure. The channel boasts enhanced safety and durability, thanks to its upgraded channel body and innovative locking mechanism, which also streamlines the installation process.
Drainage ACO Drain® Multiline V300 with cast iron grate in longitudinal C250 class bridges
- Material: polymer concrete
- Length [mm]: 1000
- Width [mm]: 350
- Height [mm]: 120
Product description
The pavement made of cobblestones requires the use of a channel in class C250. The selection of water drainage channels in the driveway is limited by the building height. A channel with a height of 12 cm is recommended. The particularly high risk of water overflow on the descent necessitates the use of a channel with a width of 35 cm. An aggressive environment containing sediment with salt and petroleum-derived substances requires the use of cast iron edges in the channels. Screwless mounting of Drainlock type grates ensures quick installation and easy cleaning of the channel.
Sealed passage through stainless steel ceiling with compression flange fi 110 with sealing compound
200x200 Cast Iron Drain with 110mm vertical outlet with M125 grate
ACO Finor® cast iron inspection chambers for M125 floor filling, fi 110
- material: cast iron
- diameter [mm]: DN 100
- length [mm]: 197
- width [mm]: 197
- height [mm]: 175
Product description
Cast iron inspection chambers allow for continuous access to the interior of the piping system for cleaning and maintenance purposes. They are designed to withstand pressures up to 0.5 bar, making them watertight and airtight.
ACO Drain® Deckline P
- Polymer concrete system, easy to seal
- Corrosion resistant system with no steel parts
- Easy assembly
- Recomended solution for concrete surfaces
- Low height with minimum impact to floor structure
- ACO SF safety groove at both ends to make channels 100% watertight
- Connected with Drainlock system grating for easy assembly and disassembly
- Pre-treated adhesive surface for 100% watertight bonding and bond strengh
Product description
These channels have been developed specially for the drainage of multi-level parking buildings and underground garages. Channels are made according to EN1433, load class A15 – C250,
completely made of ACO polymer concrete or high grade stainless steel that is frost, salt and chemicals resistant.
ACO Oleolift P
Free Standing | Light Oil Separator
- Light oil separator according to DIN EN 858, Class I
- For freestanding installation in frost free rooms
- Manufactured of welded polyethylene in round or oval design
- With supporting cage and coalescence unit
- Inner parts made of PEHD
- Inlet for respective pipe connection
- Outlet for clamping coupling
- Available in Mono or Duo pumps installations
Product description
ACO product line of freestanding light oil separators has been extended by new product Oleolift P. Where our traditional solution Oleopator P Freestanding designed for gravity discharge is not possible to use due to discharging water into a different geodetical height or when backflow protection is required, new ACO Oleolift P Freestanding all-in-one & plug-in solution is the right choice.
Oleolift P Freestanding with coalesce unit is designed to remove petroleum substances (mineral oils, gasoline, light lubricants, etc.) contained in stormwater and technological wastewater. A sludge trap which is integrated into the tank also removes suspended solids. Durable submersible pumps with metal impeller secure water discharge when gravity discharge is not possible and water must be pumped into a different geodetical height.
Using Oleolift P Freestanding secures backflow protection which avoid danger to the environment caused by escaping light liquids and thus helps to prevent the economic consequences of leakage (excavated earth, special disposal of soil, operational failure). Solution fulfill existing explicit requirements in DIN 1999-100 to protect against leakage!
ACO Triplex anti-splash equipment
- Material: stainless steel AISI 304 / AISI 316
- Nominal flow [l/s]: 1.4 - 5.4 l/s
- Length [mm]: 200
- Width [mm]: 200
- Height [mm]: 309 - 339
Product description
Easy to clean and maintain with the possibility of conducting visual inspections. Equipped with quick-locking mechanisms on the top cover, a compact backflow flap for gradients greater than 6mm. Intended for rainwater and greywater, compliant with the EN 13564-1 standard.
Coalisator P 3/150 free-standing separator and Muli Star DDP two-pump compact pumping station
- material: polyethylene
- nominal flow [l/s]: 1.5-3
- settler capacity [l]: 150
- length [mm]: 750
- width [mm]: 650
- height [mm]: 790-1150
Product description
A freestanding unit comprising a small and lightweight oil separator integrated with a sediment trap, along with a dedicated compact pumping station. The monolithic construction of the tanks ensures tightness. An indestructible coalescing filter in the separator made of steel-propylene fabric. Two pumps working alternately extend the service life and effectively protect against flooding.











