ACO Drain® Monoblock

  • Channel body without invert slope, 1000 mm
  • Inspection element, 500 mm
  • Sump unit, 500 mm
Product description

ACO Monoblock is a drainage system in a monolithic design: channel and cover are made of polymer concrete in one casting. The result is an extremely stable unit without loose parts, there is also no need for bonded joints. The unique monocast construction is a guarantee for maximum safety and stability in large-scale drainage – an ideal alternative to conventional solutions. Due to its monolithic design, the Monoblock always remains stable even under extreme loads.

ACO KerbDrain

  • material: polymer concrete
Product description

ACO KerbDrain® is a one-piece polymer concrete kerb, also serving as a drainage channel. The system allows for flexibility in designing and shaping roads, parking lots, roundabouts, and bus stops. The variety of widths and profiles enables installation of the system in cities, on highways, and even on motorways. Load class D400, in accordance with EN 1433 standard. Additionally, additional elements adapted for pedestrian crossings, wheelchair crossings, and laying in curves are recommended.

ACO Combipoint 300x500 Street Drain Class C250

  • material: cast iron
  • length [mm]: 500
  • width [mm]: 300
  • height [mm]: 630
Product description

Stainless steel (material 1.4301 or 1.4404) ensures that EG 150 floor drains offer very high resistance to temperature variations and other environmental influences (e.g., strong cleaning agents). EG 150 drains are suitable for all commonly used floor surfaces, including cement or resin screeds, ceramic tiles, and vinyl floors.

Infiltration and Retention System ACO Stormbrixx HD

  • material: plastic
  • length [mm]: 1200
  • width [mm]: 600
  • height [mm]: 612
Product description

The essence of ACO Stormbrixx lies in its basic segments measuring 1200x600x306 mm, which are assembled on-site, connecting them into a block system. By interlocking individual elements, a particularly durable structure is achieved. The recessed internal spaces facilitate the introduction of a control camera or the end of a cleaning device.

ACO Light Oil Separator | Oleopator GRP

Product description

Light liquid separators, also known as oils separators, ​ are essential devices designed to remove oils and hydrocarbons from water prior to discharge.​

ACO light liquid separators are designed and constructed in compliance with EN 858 standards and undergo rigorous LGA institute laboratory testing. This ensures maximum safety and efficiency during their operations.​ Lighter oils rise to the surface while solids settle, allowing clean water to exit. They find use in industrial, parking, ​and refueling facilities, ensuring compliance with environmental regulations.​ Regular maintenance and disposal of collected substances are crucial for optimal function.​ By preventing hydrocarbon pollution in water bodies, light liquid separators contribute to preserving water quality and safeguarding aquatic ecosystems.​

ACO Oleosmart G

  • All nominal sizes tested by independent test institute (LGA) - test report
  • Low-maintenance thanks to filter-free multi-channel technology
  • High sedimentation rate thanks to a long flow distance
  • Optimum accessibility guaranteed for maintenance, cleaning and disposal thanks to removable cage component
  • Float can be removed for cleaning without having to empty the separator
  • Operational reliability thanks to low turbulence float control
  • Sampling system can be integrated
  • Alarm device - optional accessories
Product description

The function principle of the ACO Oleosmart is based on the use of the kinetic energy from the water as it flows out. The liquid flowing in is led over a baffle into the outer, non-clogging coalescence channels, where the separation process takes place. Innovative, filterless multichannel technology means that the Oleosmart-G requires virtually no maintenance and offers a maximum of operational reliability.

ACO Q-brake Vortex

  • Constant-flow control system in the PE manhole
  • Flow rate 0.1 - 30 l/s
  • Float switch regulates a constant and fill-level dependent flow rate, thus approx. 15 - 20% of the storage capacity can be saved
Product description

ACO Q-brake Vortex is a vertical vortex flow regulator for rainwater. It is less prone to blockages than, for example, choke valves and allows for greater flows at lower water column pressures by installing a constriction at the outlet with a cross-section 4 to 6 times smaller. It ensures predictable flow control performance, activates automatically, minimizing the risk of blockages. It reduces the need for maintenance, eliminates direct human access, and is easy to install. It fits many types of manholes, is durable and corrosion-resistant, individually tailored to specific performance needs.

References

Wólczańska Street Parking, Warsaw